M2BASE | BASE STATION KIT FOR REACH M2
M2BASE | BASE STATION KIT FOR REACH M2
M2BASE | BASE STATION KIT FOR REACH M2
M2BASE | BASE STATION KIT FOR REACH M2
M2BASE | BASE STATION KIT FOR REACH M2
M2BASE | BASE STATION KIT FOR REACH M2
M2BASE | BASE STATION KIT FOR REACH M2
M2BASE | BASE STATION KIT FOR REACH M2
  • Load image into Gallery viewer, M2BASE | BASE STATION KIT FOR REACH M2
  • Load image into Gallery viewer, M2BASE | BASE STATION KIT FOR REACH M2
  • Load image into Gallery viewer, M2BASE | BASE STATION KIT FOR REACH M2
  • Load image into Gallery viewer, M2BASE | BASE STATION KIT FOR REACH M2
  • Load image into Gallery viewer, M2BASE | BASE STATION KIT FOR REACH M2
  • Load image into Gallery viewer, M2BASE | BASE STATION KIT FOR REACH M2
  • Load image into Gallery viewer, M2BASE | BASE STATION KIT FOR REACH M2
  • Load image into Gallery viewer, M2BASE | BASE STATION KIT FOR REACH M2

M2BASE | BASE STATION KIT FOR REACH M2

Regular price
$640.00
Sale price
$640.00
Regular price
Sold out
Unit price
per 
Shipping calculated at checkout.

Best Low Cost L1 / L2 GNSS Receiver Kit to Use with Module Reach M2.

 

The M2BASE is a comprehensive kit and solution that allows you to convert the module Reach M2 by Emlid in a Multiband Base Station Receiver, bolt-on to any universal tripod for GNSS receivers. It is a modular system that allows you to easily insert the Reach M2 and a Radio LoRa (optional for the case of RTK multiband registration) using routed cabling so that the Reach M2 plugged in and can be powered properly. The Kit allows easy insertion and removal of the Reach M2.

 

 

 

THE SYSTEM HAS:

 

Exclusive Multiband GNSS Antenna with High Accuracy and Gain

A cooling system with a low consumption 5V DC fan controlled by a temperature sensor PCB that permanently measures the temperature of the Reach M2.

A set of Lithium Ion batteries with 10,000mAh capacity. Tested for an estimated working time of 10 hours.

Internal wiring ready to connect the module Reach M2 (Does not include connection cable between M2 and Radio LoRA).

5/8 ″ thread for GNSS tripod.

Physical characteristics of the kit:

Weight: 350g ± 10g

Dimensions: 130 x 80 x 80 mm

 

FOR INTEGRATION REQUIRES:

Un M2BASE Kit (includes Antenna)

A module Emlid Reach M2 (not included). Note: The Emlid antenna is not required.

Optional: One Radio LoRa by Emlid (not included)

Universal charger with 5V DC output and Micro-USB cable (not included)